Schaefer 1100-44 Jib Furler

Check your headstay before ordering

The 1100-44 is the System 1100 configuration with Schaefer’s standard lower toggle/link and no upper Sta-Lok fitting. Before ordering, check your headstay wire diameter, the lower and upper attachment pin sizes, and the required pin-to-pin headstay length. Schaefer lists this system for boats 27–31 ft as a sizing guide; use your rig dimensions to confirm fit.

Headstay wire

3/16 in.

Lower clevis pin

3/8 in.

System length as supplied

43 ft, per Schaefer’s sizing chart

Sail luff tape

#6; twin-groove round foil

Upper fitting

Sta-Lok fitting not included; confirm the correct terminal for your rig.

Choosing between System 1100 versions

Schaefer lists the 1100-55 for 7/32 in. wire with a 7/16 in. lower pin and the 1100-66 for 1/4 in. wire with a 1/2 in. lower pin. If your wire and pin sizes do not match a standard pairing, contact Rigging Only to confirm the right configuration.

Manufacturer documents

• Schaefer jib furler sizing chart (PDF)
• Schaefer jib furling installation instructions (PDF)